Post by account_disabled on Mar 16, 2024 1:16:48 GMT -6
The positive wire of one light strip to the positive wire of the other light strip and the negative wire to the negative wire. Use glue or double-sided tape to secure the connections to prevent them from loosening. Power your light strips with the right power adapter Light strips usually require a specific adapter to power them. selected based on the power requirements and voltage of the light strip. When purchasing a power adapter, make sure it has enough power to support the light strip and meets the voltage requirements of the light strip. to the power adapter Connect the wire from the light strip to the output port of the power adapter.
Usually the red wire goes to the positive terminal and the black wire goes to the negative terminal. Make sure the connection is secure and prevents loosening. Connect the power adapter Plug the power adapter into a power outlet and make sure it is plugged in. Then connect the light strip's connector or wire to the power B2B Sale Lead adapter's output port. Light strip testing Finally connect the power source and test the light strip to make sure it is working properly. If the light strip is not working properly, please check whether the connection is correct and whether the power supply is normal and whether the light strip needs to be replaced.
Related Articles Raw Materials Procurement and Preparation The manufacturing process of light strips begins with the procurement and preparation of raw materials. The main components of the light bar include chip substrate packaging material leads and casing. The procurement and preparation process of these raw materials is shown in the figure below. Chip supply The chip is the main component of the light bar and determines its lighting effect and performance. Purchasing chips often involves selecting the right supplier and ensuring that the chip's optoelectronic parameters meet product.